![]() The PIN-LOK 2.0E plank is a large step into GREEN Technology in that no large old growth trees have to be harvested to build Indian Mill’s PINNED Planks.Ĭheck the FAQs and the Mechanics of Pin Locking for further information on these products. ![]() This increase in strength reduces the risk of a catastrophic failure and provides a greater true Safety Factor.Īll scaffold planks from Indian Mill Can be protected with Rhino Skin sealant to give protection to planks in all workplace environments where longevity is a must. Compared to other engineered wood products PIN-LOK has substantial strength to weight ratio producing reserve capacity to support unexpected loading. As in a butcher block, the multiple directions of the grains in wood not only create greater strength but also tremendously increase the amount of shock the PIN-LOK planks will absorb. With PIN-LOK most warping, twisting, cupping and end splitting is prevented due to the insertion of steel twist lock pins and the redirection of force by the different patterns of the wood grains. In our patented pinning process the multiple structural components of select woods are milled to size and screw locking pins inserted down the length of plank, making Pin-Lok the most functional, durable, consistent, and longest lasting wooden scaffold planks with a much greater strength to weight ratio. The failure to do this may put your workers and even your building at risk.PIN-LOK 2.0E Scaffold Plank Engineered Planking protects you This type of scaffolding is readymade and you will always find them in the market.īased on the type of construction you want to work on, you have to ensure that you pick on the correct types of scaffold planks to use. Load-bearing Scaffold Timber Planks allow builders to work at an elevated height. This is a type of scaffolding made of steel and designed to form bracket-like structures where the workers work on. It is therefore commonly used these days in construction. Among the many types of scaffold planks, this is the strongest and durable type and is very safe for the workers. It is made of steel tubes fixed to each other using steel fittings or couplers and are very easy to assemble and dismantle. It is mainly used in rooms when making repairs, painting and any related activities. This is a type of scaffolding where the working platform is placed on movable ladders or tripods and is about 5 m long. This type of scaffolding is used when making repairs, painting or pointing. In this case, chains or wire ropes are used in suspending the scaffold from the roof and it can be adjusted to any level required. ![]() However, when constructing this type of scaffolding, care must be taken to ensure no damage results. Another instance is when it is the upper part of the building that is under construction. ![]() This type of scaffolding is mainly used under situations where the ground is traffic-free or cannot support standards. Constructors either strut the needles through the openings into the floor or through the wall. This is the type of scaffolding where needles are used to support the standards. Cross braces and rakers are as well used to give it kinda additional support. In this case, the putlogs are inserted between the two rows which are 1m apart and the temporary structure is placed 20-30cm from the wall. This is because the putlogs cannot be inserted through the stone walls.the double-row scaffolding is meant for maximum support. If an employer is found to be using questionable planks as scaffold grade lumber, will OSHA issue the employer a notice of violation and fine for not having a qualified or competent person Response: There is no requirement in subpart L that scaffold grade lumber be used. Double Scaffold Planksĭouble scaffolding is mainly meant for stone masonry. All this is done to give maximum support to the weight of the workers. One end of each putlog is fixed to the wall and another to the ledger. The standards are placed 2 to 2.5 metres apart and the ledgers 1.2 to 1.5 metres apart. While at work, the plank is placed about 1.2 metres from the wall. It is made of structures such as the ledgers, standards and the putlogs. This type of scaffolding is used generally for brick masonry. Basically, there are many types of scaffold planks and they include the following: 1. These planks are either made of timber or steel and the type of plank you use will depend on the type of construction taking place. Scaffold planks are temporary structures used by constructors for support during building construction.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |